TM 55-1520-240-23-9
11-17
REMOVE DAMAGED RIG PIN FROM THRUST CONTROL
(Continued)
11-17
NOTE
Procedure is similar to remove
damaged rig pin from pilots or
copilots cockpit control assemblies.
Copilots assembly is shown here.
1.
Remove cotter pin (1), nut (2), two washers (3
and 4), and bolt (5) from thrust bellcrank (6).
Disconnect thrust transfer connecting link (7)
from bellcrank.
2.
Working in cockpit, remove thrust rig pin (T122)
(8) from hole (9) of copilots control assembly
(10). If pin is removed, perform steps 16, 23, 24,
and 25, then go to Follow-On Maintenance. If pin
cannot be removed, perform steps 3 thru 31.
11-69