TM 55-1520-240-23-9
11-164
INSTALL DASH ACTUATOR (Continued)
11-164
7.
Check two bolts (7 and 15). Bolts shall not rotate
with torque less than 10 inch-pounds. There
shall be no axial looseness. If bolts rotate or are
loose, add washer under nut and repeat step 6.
8.
Connect No. 1 AFCS connector (19) to upper
receptacle (20) of actuator (1). Remove tag from
connector.
9.
Position clamp (21) on actuator (1) to hold wire
(22). Install screw (23) and nut (24) in clamp.
10.
Connect No. 2 AFCS connector (25) to lower
receptacle (26) of actuator (1). Remove tag from
connector.
11.
Position clamp (27) on actuator (1) to hold wire
(28). Install screw (29) and nut (30) in clamp.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform flight control operational check (TM
55-1520-240-T).
Install closet backup panel (Task 2-2).
Install closet acoustic blanket (Task 2-108).
END OF TASK
11-674
Change 1