TM 55-1520-240-23-9
11-109
ADJUST THRUST CONTROL DETENT
(Continued)
11-109
2.
Measure and record distance X between ILCA
bellcrank (4) and ILCA housing (5).
3.
Have helper in cockpit, press trigger switch (1)
of thrust control (2) and pull thrust lever (3) up
about 7 inches.
4.
Push lever down until stop screw (6) on transfer
bellcrank (7) just touches detent (8). Hold this
position. Release trigger.
5.
Repeat step 2. Check that difference between
measurements is 3/32 to 5/32 inch. If more than
5/32 inch, loosen nut (10) and tighten nut (9) of
screw (6). If less than 3/32 inch, loosen nut (9)
and tighten nut (10). Tighten nuts after check.
6.
Repeat steps 3, 4, and 5.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of flight control system
(TM 55-1520-240-T).
Install closet backup panel (Task 2-2).
Install closet acoustic blanket (Task 2-108).
END OF TASK
11-536