TM 55-1520-240-23-9
11-6.3
ISOLATION PROCEDURES FOR CHECKING CONTROLS LOOSENESS
(Continued)
11-6.3
54.
Working from forward left work platform, remove
strap (10) from bellcrank (11) and tube (12).
Remove block (8).
55.
Remove strap (15) from bellcrank (16) and bolt
(17). Remove block (13).
56.
Remove pin (1) from support (2).
FOLLOW-ON MAINTENANCE:
Connecting forward and aft servocylinder connecting
links (Task 11-193).
Remove servocylinder safety blocks (T31) (Task
11-29).
Perform operational check of flight control system
(TM 55-1520-240-T).
Close forward and aft work platforms (Task 2-2).
Install left and right landing lights (Task 9-79).
Install forward transmission drip pan (Task 2-3).
Install closet backup panel (Task 2-2).
Install closet acoustic blanket (Task 2-108).
Install pilots and copilots floor panels (Task 2-82).
Perform operational check of landing lights (TM
55-1520-240-T).
END OF TASK
11-35