• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  PILOTS  COCKPIT CONTROL ASSEMBLY (Continued)
REMOVE PILOTS COCKPIT CONTROL ASSEMBLY (Continued) REMOVE  ROLL CONNECTING LINK

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  314    315    316    317    318  319  320    321    322    323    324  
TM  55-1520-240-23-9 11-73 REMOVE  PILOT’S  COCKPIT CONTROL  ASSEMBLY (Continued) 11-73 NOTE Attaching  bolt,  washers,  and  nut will be  temporarily installed  after  links are removed. REMOVE  YAW  CONNECTING LINK 9. Move  bellcrank (14) for access to  link  (15). 10. Tag  yaw  connecting  link  (15).  Remove  cotter pin (16),  nut  (17),  two  washers  (18)  and  bolt  (19) from  bellcrank (14).  Disconnect  link. 11. Move  bellcrank (20) for access to  link  (15). 12. Remove  cotter  pin  (21), nut  (22), two  washers (23),  and  bolt  (24)  from  bellcrank  (20). Disconnect  link. 13. Install  two  bolts  (19  and  24),  four  washers  (18 and  23)  and  two  nuts  (17  and  22) in  bellcranks (14  and  20). 14. Have  helper in  cockpit  hold  bolt  (25).   Working through  left access  (6),  remove  cotter pin  (26), nut  (27), and  washer  (28). 15. Remove  bolt  (25)  and  washer  (29).   Slide bellcrank  (20)  fully aft. 16. Slide  link (15) fully  left. 17. Install  bolt (25) two  washers (29  and  28), and  nut (27) in  structure  (30). 11-323







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.