• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
RIG FORWARD OR AFT SWASHPLATE  AND  SERVOCYLINDERS (Continued) RIG AFT SWASHPLATE  AND  SERVOCYLINDERS
RIG FORWARD OR AFT SWASHPLATE  AND  SERVOCYLINDERS (Continued) - TM-55-1520-240-23-9_265

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  241    242    243    244    245  246  247    248    249    250    251  
TM  55-1520-240-23-9 11-54 RIG FORWARD OR  AFT SWASHPLATE  AND SERVOCYLINDERS (Continued) 11-54 Keep   movement  on  aircraft to  minimum;  otherwise,  false measurements  can  occur. 31. Working  from  aft  left  work  platform,  position protractor  (26)  on  fixed  swashplate  (51).  Align protractor  with  LCT  actuator  (52)  and  LCT connecting  link  (53).  Measure  and  record  angle of  swashplate.   Remove  protractor. Do  not  rotate  protractor  between measurements;  otherwise,  false measurements  will occur. 32. Position  protractor  (26)  on  top  of  rotor  shaft (54).  Align  protractor  with  actuator  (52)  and  link (53).   Measure  and  record  angle  of  rotor  shaft. Remove  protractor. 33. Check  angles  measured  in  steps  31  and  32. Step  31  angle  must  be  less  than  step  32  angle. Subtract  angle  of  step  31  from  angle  of  step  32. Difference  must  be  2.6º  to 3.0º.  If  within  limit,  go to  step  34.  If  not,  within  limits,  perform  steps  14 thru  26,  then  repeat  steps  31,  32,  and  33. 11-248







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.