RIG DASH ACTUATOR FOR HOVER (Continued)
Set switch (6) to OFF.
Have pilot start engines and hover aircraft
crosswind (TM 1-1520-240-10).
Working in cockpit; check indicator (3). Indication
must be between one half to one division aft of
N. If indication is within limits perform step 19
then go to step 22. If not, perform steps 19, 20,
Have pilot land aircraft (TM 1-1520-240-10).
Adjust all six pitch links one half the amount of
limit determined in step 18. If indication from
step 18 is less than limit, shorten forward pitch
links and lengthen aft pitch links. If indication is
more, lengthen forward pitch links, and shorten
aft pitch links. All pitch links must be adjusted the
same amount (Task 5-94).
A 10 mark adjustment of each pitch
link gives 0.75 inch stick position