TM 55-1520-240-23-9
11-43
RIG PILOTS OR COPILOTS THRUST CONTROL
(Continued)
11-43
RIG PILOTS THRUST CONTROL
17.
Working through right access (22), remove cotter
pin (23), nut (24), two washers (25 and 26), and
bolt (27) from bellcrank (28).
18.
Disconnect connecting link (29) from bellcrank
(28). Loosen nut (30) on link.
19.
Turn rod end (31). One turn moves thrust control
(32) 0.18 inch. Turn clockwise to move control
(32) up.
20.
Position link (29) in bellcrank (28). Install bolt
(27) loosely in bellcrank.
21.
Have helper in cockpit, measure distance
between grip (33) and pivot block (34) of control
(32). Distance must be 5.1 to 5.7 inches. If
same go to step 21. If not repeat steps 16 thru
20.
11-180