NEUTRAL RIG CHECK
Cockpit rigging pins must not be
removed; otherwise, damage to
components will occur.
Do not use more than 20 pounds
of force to install rig pin; otherwise,
damage to component will occur.
Do not lubricate rig pins. Lubrication
will cause dirt to collect at rig pin hole.
Working in passageway, install first stage rig pin
(T44) (1) in four bellcranks (2, 3, 4, and 5). If
pin does not fit, rig first stage bellcranks (Task
11-51), then repeat step 1.
Remove pin (1) from bellcranks (2 and 5).
Working from forward left work platform, install
second stage rig pin (T135) (6) through support
(7) and four bellcranks (8, 9, 10, and 11). If pin
does not fit, rig second stage bellcranks (Task
11-51), then repeat step 3.