TM 55-1520-240-23-8
10-92
INSTALL NO. 2 SYSTEM (RIGHT SIDE) MAIN FUEL TANK SERVICING CHECK
VALVE
(Continued)
10-92
1.
Remove barrier material and tape from manifold
(1). Clean any tape residue from face of flange.
Use dry cleaning solvent (E162) and cloths
(E135). Use goggles for eyes. Wear gloves
(E186).
2.
Position check valve (2), flanged connector (3)
and support plate (4) on manifold (1).
3.
Install six screws (5).
4.
Install six packings (6), two on elbow (7), two on
elbow (8), one on tube (9) and one on flanged
connector (3).
10-442