TM 55-1520-240-23-8
10-86
INSTALL AUXILIARY FUEL PUMP PRESSURE SWITCH
(Continued)
10-86
NOTE
There are four auxiliary fuel pump
pressure switches in fuel system.
Procedure is same for installing any
pressure switch.
1.
Remove cap and plug from pressure switch (1)
and hose (2).
2.
Position pressure switch (1) on bracket (3).
3.
Install washer (4) and nut (5) on pressure switch
(1).
4.
Connect hose (2).
5.
Connect electrical connector (6).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of fuel system (TM
55-1520-240-T).
Close aft intertank panel (Task 2-188).
Close forward landing gear access door (Task 2-2).
END OF TASK
10-402