TM 55-1520-240-23-7
9-144
ASSEMBLE POWER STEERING CONTROL BOX (AVIM)
(Continued)
9-144
INSPECT
14.
Position sleeve bushing (33), bearing (34), and
bushing (35) in housing (36). Install two screws
(37) and nuts (38).
15.
Position cam (39) and install shoulder pin (40).
16.
Align holes (41) in shoulder pin (40) and cam
(39). Install roll pin (42) and cotter pin (43).
Install screw (44).
17.
Install pin (45).
18.
Position resistor (46) in housing (36).
19.
Install washer (47) and nut (48).
20.
Align hole in shaft of resistor (46) and cam (39).
Install roll pin (49) and cotter pin (50). Install
screw (51).
9-577