TM 55-1520-240-23-7
9-136
ASSEMBLE PITCH AND ROLL CONTROL STICK GRIP (AVIM)
9-136
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Soldering Gun
Materials:
Grease (E189)
Solder (E360)
Personnel Required:
Aircraft Electrician
Inspector
References:
TM 55-1520-240-23P
1.
Remove tape and solder two wires (1) to switch
(2). Remove tags. Use solder (E360).
2.
Position switch (2) in grip (3). Install screw (4).
3.
Remove tape and solder two wires (5) to switch
(6). Remove tags. Use solder (E360).
4.
Position switch (6) in grip (3). Install screw (7).
Take care not to overtorque screw (7)
and strip thread.
4.1.
With 36 , position switch button ring guard (6.1)
over switch (6). Install screw (7).
5.
Remove tape and solder two wires (8) to switch
(9). Remove tags. Use solder (E360).
6.
Position switch (9) in grip (3). Install screw (10).
9-539