TM 55-1520-240-23-7
9-120
ASSEMBLE TROOP WARNING BOX
(Continued)
9-120
6.
Position light (11) in cover (4).
7.
Remove tape and insert wire (13) through back
of socket (12).
8.
Solder wire (13) to socket (12). Use solder
(E360). Remove tag.
NOTE
Procedure is same to install either
lamp.
9.
Install lamp (14) in light (11).
10.
Position lens (15) and retainer (16), on cover (4).
11.
Install two screws (17), washers (18), and nuts
(19).
12.
Connect socket (12) to light (11).
INSTALL RELAY
13.
On forward box only, position relay (19) over two
mounting holes (20).
9-458