TM 55-1520-240-23-7
9-101
REMOVE OVERHEAD PANEL VARIABLE RESISTOR
(Continued)
9-101
NOTE
Procedure is similar to remove CTR
SECT INST LTS resistor, PILOT or
COPILOT INST LTS resistor, FLOOD
LTS resistor, CONSOLE LTS resistor,
DOME LTS resistor, and OVERHEAD
PANEL LIGHTS resistor. Removal
of CONSOLE LTS resistor is shown
here.
1.
Remove two bolts (1) and washers (2) from panel
(3). Lower panel.
2.
Tag and unsolder eight wires (4) from resistor
(5). Tape wire ends. Use tape (E395).
3.
Remove three screws (6) from three knobs (7).
4.
Remove three knobs (7).
5.
Remove three holders (8).
6.
Remove panel (9) from panel (10).
7.
Remove nut (11) and washer (12) from resister
(5).
8.
Remove resistor (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-403