TM 55-1520-240-23-7
9-98.2
INSTALL OVERHEAD PANELS IN PANEL
(Continued)
9-98.2
START PANEL WITHOUT 74
9.
Install START panel (84) as follows:
a.
Position panel (84) on panel (2). Tighten four
screws (85).
b.
Remove tape. Connect wire (86) to
receptacle (87). Remove tag.
c.
Remove tape. Connect and solder six wires
(88) to two receptacles (89). Use solder
(E360). Remove tags.
d.
Remove tape. Connect 23 wires (90) to
two switches (91) and one receptacle (87)
by installing washers (92) and screws (93).
Remove tags.
INSPECT
NOTE
If no other panels are to be replaced,
go to step 15.
9-338