TM 55-1520-240-23-7
9-85.1
REMOVE NVG FORMATION LIGHT
9-85.1
INITIAL SETUP
Applicable Configurations:
With 17
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Materials:
Paper Tags (E264)
Tape (E385)
Personnel Required:
Aircraft Electrician
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
NOTE
Procedure is same to remove any
light.
1.
Cut sealant from edge of light (1) and screws (2).
2.
Loosen two screws (2) and lift light (1) from
fuselage (3).
3.
Pull two wires (4) from structure (3) until two
connectors (5) are out of hole (6) in structure.
Tag two wires. Use tags (E264).
4.
Cut two sleeves (7) from connectors (5).
Disconnect connectors. Remove light (1).
5.
Tape ends of wires (4). Use tape (E385).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-280