TM 55-1520-240-23-7
9-83
REMOVE AFT FORMATION LIGHTS
9-83
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Work Stand
Materials:
Paper Tags (E264)
Tape (E385)
Personnel Required:
Aircraft Electrician
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
1.
Cut sealant from edge of light (1) and two screws
(2).
2.
Remove screws (2) from light (1).
3.
Pry light (1) from structure (3).
4.
Pull two wires (4) from structure (3) until two
connectors (5) are out of hole (6), in structure.
Tag two wires. Use tags (E264).
5.
Cut two sleeves (7) from connectors (5).
Disconnect connectors. Remove light (1).
6.
Tape ends of wires (4). Use tape (E385).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-275