TM 55-1520-240-23-7
9-81
INSTALL LANDING LIGHT LAMP
9-81
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedures are similar to install left or
right landing light lamp. Without 17 ,
both lights are same. With 17 , left
light has NVG lens and lamp.
1.
Remove tape, support lamp (1), and connect two
wires (2). Install two screws (3), and washers
(4). Remove tags.
INSPECT
2.
Position retaining ring (5) or NVG lens (5.1) with
three sleeves (6) and screws (7) aligned on lamp
(1).
9-272