TM 55-1520-240-23-7
9-41
REMOVE APU GENERATOR CURRENT TRANSFORMER AFT
(Continued)
9-41
NOTE
Procedure is same for removal of
three APU current transformers.
Removal of one transformer is shown
here.
1.
Tag and disconnect wire (1) from ground stud (2)
by removing nut (3) and washer (4). Tape end.
2.
Remove screw (5) and washer (6) from clamp (7).
3.
Remove wire (1) from clamp (7) and feed through
transformer (8).
4.
Tag and disconnect two wires (9) from
transformer (8) by removing two screws (10), four
washers (11), and two nuts (12). Tape ends.
9-128