TM 55-1520-240-23-7
9-21
INSTALL BATTERY RELAY
(Continued)
9-21
2.
Remove tape and connect two wires (5) to
terminal A2 (6).
3.
Remove tape and connect five wires (7) to
terminal A1 (8).
4.
Install two nuts (9) and washers (10). Remove
tags.
5.
Remove tape and connect three wires (11) to
terminal X1 (12).
6.
Remove tape and connect wire (13) to terminal
X2 (14).
7.
Install two nuts (15) and washers (16). Remove
tags.
INSPECT
8.
Slide four boots (17) over terminals (6, 8,12, and
14).
FOLLOW-ON MAINTENANCE:
Close left electrical compartment access door (Task
2-2).
Perform operational check of dc power system (TM
55-1520-240-T).
END OF TASK
9-64