TM 55-1520-240-23-7
8-107
REMOVE CENTER INSTRUMENT PANEL
(Continued)
8-107
3.
Remove two screws (11) from light plate (12).
Without 17 , remove two lens caps (12.1).
Remove plate.
4.
Remove three nuts (13) and washers (14). Push
three switches (15) through panel (6). Tag
switches.
5.
Without 17 , reach behind panel (6) and unsolder
wires from each of two light sockets (16).
5.1.
With 17 , reach behind panel (6) and disconnect
wires from light socket (17).
NOTE
Helicopters without 17 have resistor
assemblies. Helicopters with 17 do
not have resistor assemblies.
6.
Without 17 , reach behind panel (6) and hold
each of two resistor assemblies (18) in turn.
Remove two screws (19) and nut (20) from each
assembly. Tag resistor assemblies.
NOTE
Helicopters without 17 have 16
postlights. Helicopters with 17 have
17 or 21 postlights.
7.
Without 17 , disconnect wire (21) from each of
16 postlights (22). Tape wire ends.
8-348