TM 55-1520-240-23-7
8-105
REMOVE COPILOTS INSTRUMENT PANEL
(Continued)
8-105
3.
Disconnect five wires (6) from TB1 (7). Use
contact insertion/removal tool.
4.
Remove five wires (6) from wire harness (8).
5.
Remove module directly above each nut (9).
Remove two screws (10), nuts (9), and TB1 (7).
6.
Remove five screws (11), washers (12), and
clamps (13).
7.
Move wire harness (8) away from panel (1).
NOTE
Helicopters without 17 have three
light fixtures. Helicopters with
17 have four light fixtures.
8.
Remove two screws (14) from each light fixture
(15). Remove fixture by cutting wire (16) and
pulling end through panel (1). Tag wire.
9.
Remove each of two switches (17) by removing
nut (17.1) and washer (17.2). Push switch
through instrument panel (1).
8-340