TM 55-1520-240-23-7
8-77
REPLACE NO. 2 ENGINE TRANSMISSION OIL TEMPERATURE
TRANSMITTER
(Continued)
8-77
REMOVE TRANSMITTER
1.
Disconnect electrical connector (1) from
transmitter (2).
2.
Remove lockwire from transmitter (2).
3.
Remove transmitter (2) from transmission sump
(3).
4.
Wipe up spilled oil. Use cloth (E120).
5.
Remove packing (4) from transmitter (2).
INSTALL TRANSMITTER
Oil (E254) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes with water for least 15
minutes. Get medical attention for
eyes.
6.
Coat packing (4) and threads of transmitter (2)
with oil (E254).
7.
Install packing (4) on transmitter (2).
8.
Install transmitter (2) in transmission sump (3).
Torque transmitter to 80 inch-pounds.
9.
Lockwire transmitter (2) to transmission sump (3).
10.
Connect electrical connector (1) to transmitter
(2).
INSPECT
FOLLOW-ON MAINTENANCE:
Service No. 2 engine transmission (Task 1-54).
Close aft pylon lower fairing (Task 2-2).
Close aft pylon door (Task 2-2).
Perform operational check (TM 55-1520-240-T).
END OF TASK
8-210
