TM 55-1520-240-23-7
8-44
REMOVE TURN AND SLIP INDICATOR — PILOT’S OR COPILOT’S INSTRUMENT PANEL
8-44
INITIAL SETUP
Applicable Configurations:
Without 17
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Materials:
None
Personnel Required:
Aircraft Electrician
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
NOTE
Procedure is same for removing pilot’s
or copilot’s turn and slip indicator.
1.
Reach up under instrument panel (1) and
disconnect wire harness connector (2) from
indicator (3).
2.
Remove two long screws (4) and nuts (5).
NOTE
Do not cut or disconnect wire to light
fixture.
3.
Remove light fixture (6). Pull fixture down and
aft, away from indicator (3).
8-130
Change 1
