TM 55-1520-240-23-7
9-152
DISASSEMBLE DUAL HOOK RELAY BOX (AVIM)
(Continued)
9-152
9.
Remove nine screws (18) and nuts (19).
10.
Remove two relay brackets (20) with relays (21).
NOTE
Procedure is same to remove all six
relays. Removal of one relay is shown
here.
11.
Cut and remove insulation sleeving (22) from
wires (23). Use sharp knife.
12.
Tag and unsolder six wires (23) from relay (21).
13.
Remove three screws (24), nuts (25), and
washers (26). Remove relay (21).
14.
Repeat steps 9 thru 13 for remaining five relays
(21).
15.
Tag and unsolder 51 wires (27) from terminal
boards (28 and 29).
16.
Remove six screws (30) and nut (31).
17.
Remove terminal boards (28 and 29) and
insulators (32 and 33).
9-618