TM 55-1520-240-23-6
7-224
REMOVE OUTBOARD BRAKE MASTER CYLINDER
(Continued)
7-224
NOTE
Procedure is same to remove pilots
or copilots outboard cylinder. Pilots
cylinder is shown here.
1.
Operate cockpit foot brake pedals ten times to
relieve system pressure.
1.1.
Tag and disconnect three hydraulic hoses (1)
from cylinder (2). Use cloths (E120) for spilled
fluid. Use gloves (E186).
2.
Remove cotter pin (3), nut (4), two washers (5),
and bolt (6).
3.
Hold cylinder (2). Remove cotter pin (7), nut (8),
two washers (9), and bolt (10). Remove cylinder.
4.
Loosen three nuts (11). Remove three elbows
(12), washers (13), and packings (14) from
cylinder (2).
5.
Remove scupper (15) from shaft.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-844