TM 55-1520-240-23-6
7-212
REMOVE UTILITY RESERVOIR/COOLER
(Continued)
7-212
1.
Loosen clamp (1) and disconnect duct (2) from
reservoir/cooler (3).
2.
Loosen clamp (4) and disconnect hose (5) from
elbow (6).
3.
Open valve (7) and drain fluid reservoir/cooler
(3). Use container and cloths (E135) for spilled
fluid. Use gloves (E186).
4.
Connect hose (5) to elbow (6). Tighten clamp (4).
5.
Loosen clamps (8) and disconnect hose (5) from
valve (7).
6.
Tag and disconnect three tubes (9).
7.
Tag and disconnect three cable plugs (10).
8.
Remove four nuts (11) and washers (12).
9.
Remove reservoir/cooler (3).
7-808