TM 55-1520-240-23-6
7-205
INSTALL UTILITY OR APU MOTOR RETURN CONTROL MODULE
(Continued)
7-205
NOTE
There are two fail indicators on the
module, APU motor pump and utility
pump. Installation is same. Utility
pump indicator is shown here.
1.
Install retainer (1) and two packings (2) on
indicator (3).
2.
Install indicator (3) and three screws (4) in
module (5). Use cloths (E135) for spilled fluid.
Use gloves (E186).
3.
Torque screws (4) to 35 inch-pounds. Lockwire
three screws (4). Use lockwire (E231).
4.
Connect connector (6) to indicator (3).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check (TM 55-1520-240-T).
Service utility hydraulic reservoir (Task 1-59 or 1-62).
Close cargo ramp (TM 55-1520-240-10).
END OF TASK
7-794