TM 55-1520-240-23-6
7-157
INSTALL PRESSURE CONTROL MODULE FILTER
(Continued)
7-157
1.1.
Install packings (2.1 and 2.2) and retainer (2.3)
in FILTER port (3).
2.
Install bowl (2) in FILTER port (3). Tighten hand
tight. Use cloths (E135) for spilled fluid.
Electrical connectors are to be
tightened no more than 1/16 to
1/8 turn beyond finger-tight during
installation, otherwise they will be
damaged.
3.
Connect connector (4) to indicator (5).
4.
Lockwire bowl (2) to module (6). Use lockwire
(E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operation check (TM 55-1520-240-T).
END OF TASK
7-683