TM 55-1520-240-23-6
7-150
REMOVE UTILITY HYDRAULIC PUMP
(Continued)
7-150
NOTE
If a crack in the hydraulic pump casing
is suspected during removal, refer to
TM 1-1520-253-23.
1.
Tag and disconnect four hoses (1) from pump
(2). Use tag (E264).
2.
Remove four nuts (3).
3.
Remove pump (2) and gasket (2.1).
4.
Cover pump (2) mount with barrier material (E81)
or equivalent.
NOTE
When removing a Stratopower/
Dynapower pump there is a metal
shim bonded to pump flange. If this
shim comes unbounded from the
pump flange. It does not have to be
rebounded for installation.
5.
Wrap splines (4) with barrier material (E81) and
tape (E388).
7-667