TM 55-1520-240-23-6
7-133
INSTALL FORWARD SWIVELING SERVOCYLINDER
(Continued)
7-133
INSTALL SERVOCYLINDER WITHOUT 50
Make sure slip bushings are installed
in lug. Otherwise, personal injury, loss
of life, or loss of helicopter can result.
13.
Check that bushings (32) are installed in lugs
(33).
NOTE
Two washers may be installed under
nut to allow for cotter pin installation.
Install countersunk washers with
countersink against bolthead.
14.
Have helper on work platform support
servocylinder (4). Position mounts (34) in lugs
(33).
14.1.
Install bolt (35) with countersunk washer (36),
washer (36.1), and slip bushing (36.2) through
lugs (33). Install one or two washers (36.3) and
nut (37) on bolt. Go to step 15.
INSTALL SERVOCYLINDER WITH 50
14.2.
Install bolt (35) through lugs (33). Install one or
two washers (36.3) and nut (37) on bolt.
15.
Torque bolt (35) to 320 to 720 inch-pounds.
Install cotter pins (38).
16.
Remove block (39) from under swashplate.
7-599