TM 55-1520-240-23-6
7-129
REPAIR PIVOTING SERVOCYLINDER (AVIM)
7-129
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hydraulic Repairers Tool Kit, NSN 5180-00-323-4891
Arbor Press
Rivet Tool
Materials:
Paper Tags (E264)
Epoxy Primer (E292)
Cadmium Solution (E361)
Alodine (E65)
Brush (E86)
Gloves (E184.1)
Parts:
Screws
Rivets
Caps
Personnel Required:
Aircraft Pneudraulics Repairer
Inspector
References:
MIL-C-5541
QQ-P-416
Task 2-350.1
Equipment Condition:
Off Helicopter Task
MOUNTING LUG BEARINGS
1.
Remove two screws (1), four washers (2), two
spacers (3), and two nuts (4) from four clamps (5
and 6). Remove two clamps (5).
2.
Tag and disconnect two tubes (7). Use tag
(E264).
3.
Install caps (8) on nipples (9), elbows (10), and
tees (11).
7-577