TM 55-1520-240-23-6
7-122
INSTALL NO. 1 OR NO.2 FLIGHT CONTROL COOLING FAN
(Continued)
7-122
NOTE
Procedure is similar to install No. 1
or No. 2 flight control cooling fan.
Installation of No. 1 fan is shown here.
1.
Position fan (1) on structure (2), receptacle (3)
outboard.
2.
Install four bolts (4) and washers (5).
3.
Connect electrical plug (6) to receptacle (3).
4.
Install duct (7) and clamp (8) on fan (1). Tighten
nut (9).
5.
Lockwire clamp (8). Use lockwire (E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational check of cooling fan (TM
55-1520-240-T).
Close right forward work platform or right aft pylon
access panels (Task 2-2).
END OF TASK
7-538