TEST ILCA JAM SENSORS PHASE II
Disconnect the input control rod from the input
lever of the suspect ILCA.
Move the input lever up and down within the
range of its stops. The lever must move freely
Any high friction, binding or erratic movement of
the control valve is cause for the replacement
of the ILCA.
Insure that the input control rod
removed from a suspect ILCA is
reinstalled in accordance with Task
Electrical power off.
Battery disconnected (Task 1-39).
Control closet panel installed (Task 2-2).
Control closet acoustic blanket installed (Task 2-210).
END OF TASK