TM 55-1520-240-23-6
7-95
REMOVE EXTENSIBLE LINK SERVO VALVE (AVIM)
(Continued)
7-95
NOTE
Procedure is same to remove No. 1 or
No. 2 roll, pitch, or yaw servo valve.
Removal of No. 2 (top) valve is shown
here.
1.
Release cable (1) of servo valve (2) from cable
(3). Cut ties.
2.
Remove lockwire and two screws (4) from
bracket (5).
3.
Remove screw (6) from terminal lug (7) and
bracket (5).
4.
Remove lockwire and locknut (8) from
connector/receptacle (9).
7-373