TM 55-1520-240-23-6
7-85.1
REMOVE PISTON SEALS ILCA EXTENSIBLE LINK (AVIM)
7-85.1
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hydraulic Repairers Tool Kit, NSN 5180-00-323-4891
Materials:
None
Personnel Required:
Aircraft Pneudraulics Repairer
Equipment Condition:
Off Helicopter Task
Extensible Link Self Feedback Transducer Removed
(Task 7-88.1)
Cover is spring-loaded. Remove with
caution. Otherwise personal injury
can occur.
1.
Remove two screws (1) and wing nuts (2) from
adapter (3).
2.
Remove lockwire from four screws (4) of
extensible link (5).
3.
Remove two opposing screws (4).
4.
Install two screws (1) with wing nuts (2). Tighten
wing nuts against cover (6).
5.
Remove remaining two screws (4).
6.
Loosen two wing nuts (2). Remove two screws
(4).
7.
Remove cover (6) and packing (7). Set cover
aside.
7-342