TM 55-1520-240-23-6
7-54
REMOVE NO. 1 OR NO. 2 POWER CONTROL MODULE PUMP CHANGE
INDICATOR
(Continued)
7-54
NOTE
There are two pump change
indicators, one in No. 1 and one in
No. 2 module. Procedure is same to
remove any pump change indicator.
No. 1 module is shown here.
1.
Disconnect connector (1) from indicator (2).
2.
Remove lockwire from three screws (3). Remove
screws from indicator (2).
3.
Remove indicator (2), retainer (4), and two
packings (5) from module (6). Use cloths (E135)
for spilled fluid. Use gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-262