TM 55-1520-240-23-6
7-44
INSTALL NO. 1 OR NO. 2 POWER CONTROL MODULE PRESSURE SWITCH
(Continued)
7-44
NOTE
There are two pressure switches, one
in No. 1 and one in No. 2 module.
Procedure is same to install any
pressure switch. No. 1 module is
shown here.
1.
Install switch (1) and packing (2) in SYS PRESS
SW port (3).
2.
Lockwire switch (1) to pressure transmitter (4).
Use lockwire (E231).
3.
Connect connector (5) to switch (1).
INSPECT
FOLLOW-ON MAINTENANCE:
Service flight control system (Task 1-62 or 1-63).
Perform operational check (TM 55-1520-240-T).
Close right forward work platform or right pylon
access door (Task 2-2).
END OF TASK
7-219