TM 55-1520-240-23-6
7-340
BLEED WHEEL BRAKE HYDRAULIC SYSTEM (WITHOUT EXTERNAL
POWER)
(Continued)
7-340
NOTE
Throughout this task, whenever a
connection is loosened to let air
escape from a hydraulic line, use a
container and cloths (E120) to catch
spilled fluid. Wear gloves (E186).
PILOTS RIGHT AND LEFT WHEEL BRAKE SYSTEM
1.
Working in cockpit, tag and disconnect hose
(1) from PRESS port (2) of pilots right brake
cylinder (3).
2.
Install cap (4) in port (2) of cylinder (3).
3.
Tag and disconnect hose (5) from RTN port (6)
of cylinder (3).
4.
Install plug (7) in hose (5).
5.
Connect hose (1) to port (6) of cylinder (3).
6.
Remove bleed plug (8) from port (9) of cylinder
(3).
7.
Connect hose (10) to port (9) of cylinder (3).
Position loose end of hose in container.
8.
Install plug (11) in hose (10).
9.
Working at right forward landing gear, connect
bleed hoses (12) to bleed fittings (13) of two
wheel brake cylinders (14 and 15). Position
hoses in container.
7-1257