TM 55-1520-240-23-6
7-325
FLUSH RAMP CONTROL PRESSURE TUBING
(Continued)
7-325
Filter assembly kit
ADHT6814-M9716M must be
installed in test stand pressure
line. Otherwise, system can be
contaminated.
NOTE
To operate hydraulic test stand, refer
to applicable manual.
1.
Working from ramp, disconnect tube (1) from
RAMP pressure port (2) of pressure control
module (3).
2.
Connect test stand pressure hose (4) to tube (1).
3.
Connect hose (5) to pressure tubes (6 and 7).
4.
Connect hose (8) to RAMP DOWN tube (9).
5.
Connect hose (8) to UNLOCK tube (10).
7-1189