TM 55-1520-240-23-6
7-310
CLEAN SWIVEL LOCK ACTUATOR PARTS (AVIM)
(Continued)
7-310
2.
Clean plug (5), nut (6) piston (7), and piston rod
(8). Use dry cleaning solvent (E162) and brush.
Use goggles for eyes. Use gloves (E186).
3.
Spray inside surfaces of cylinder (9) with dry
cleaning solvent (E162). Use hand oiler (10).
Use goggles for eyes. Use gloves (E186).
4.
Flush inside surfaces and passages of cylinder
(9). Use hydraulic fluid (E199) to remove all dirt
or foreign matter. Use gloves (E186).
5.
Spray inside surfaces of cylinder (9) with dry
cleaning solvent (E162) to remove hydraulic fluid.
Use goggles for eyes. Use gloves (E186).
6.
Drain cylinder (9). Use container dry cylinder
with cloths (E135).
FOLLOW-ON MAINTENANCE:
Inspect swivel lock actuator (Task 7-311).
END OF TASK
7-1119