TM 55-1520-240-23-6
7-305
REMOVE POWER STEERING OUT-OF-PHASE SWITCH
7-305
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer (2)
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Hydraulic Power Off
Aft Right Landing Gear Access Panel Open (Task 2-2)
1.
Disconnect cable plug (1) from out-of-phase
switch (2).
2.
Remove lockwire from four mounting screws (3).
3.
Remove four screws (3) and washers (4).
4.
Remove switch (2) from actuator (5).
5.
Remove packing (6), spacer (7) and packing (8).
6.
Remove lockwire from nut (9) and lockring (10).
7-1107