TM 55-1520-240-23-6
7-274
ADJUST CARGO RAMP ACTUATING CYLINDERS
(Continued)
7-274
1.
Set EMERG UTIL PRESS valve (1) to NORMAL.
2.
Press and hold MANUAL OPER knob (2) on
sequence valve (3). Turn pin (4) 90º in either
direction. Release knob.
3.
Set ramp control handle (5) to UP. Raise ramp to
within 12 inches approx. of fully closed position.
Set handle to STOP.
4.
Set handle (5) to UP and back to STOP. Repeat
this procedure until ramp does not move.
7-1023