TM 55-1520-240-23-5
6-208.3
INSTALL ENGINE TRANSMISSION CHIP DETECTOR ASSEMBLY
6-208.3
INITIAL SETUP
Applicable Configurations:
With 37
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 0 to 30 Inch-Pounds
Torque Wrench, 0 to 150 Inch-Pounds
Materials:
Lockwire (E231)
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedure is same to install chip
detector assembly in right or left
transmission. Right transmission
shown.
INSTALL VALVE
1.
Install valve (1) with new packing (2) in port (3).
Torque valve to 77 inch-pounds.
INSTALL PLUG
2.
Install chip detector plug (4) in valve (1) by
inserting and twisting it clockwise until it locks in
place. Make sure cable (5) points forward within
60º as shown.
6-680