TM 55-1520-240-23-5
6-202
INSPECT ENGINE TRANSMISSION DEBRIS DETECTION SCREEN
6-202
INITIAL SETUP
Applicable Configurations:
All
Tools:
Goggles
Materials:
Dry Cleaning Solvent (E162)
Cloth (E120)
Brush (E86)
Gloves (E186)
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Off Helicopter Task
1.
Check screen (1) for bits of metal and other
debris. Retain all debris for contamination
analysis (Task 6-194).
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
2.
Clean screen (1) with dry cleaning solvent
(E162) and brush (E86). Wear gloves (E186)
and goggles.
3.
Inspect screen (1) for tears. There shall be no
tears.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-664