• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
INSPECT COMBINING TRANSMISSION FAN ASSEMBLY AND FAN DRIVE SHAFT     (Continued) - TM-55-1520-240-23-5_623
COMBINING  TRANSMISSION  OIL COOLER FAN  DRIVE SHAFT RETAINING SHIELD REPLACEMENT

TM-55-1520-240-23-5 CH-47D Heilcopter Manual
Page Navigation
  588    589    590    591    592  593  594    595    596    597    598  
TM  55-1520-240-23-5 6-182.1 INSPECT  COMBINING  TRANSMISSION  FAN  ASSEMBLY  AND  FAN  DRIVE SHAFT (Continued) 6-182.1 Oil (E253/E254/E254.1)  is toxic.  It can irritate  skin  and  cause  burns.   Avoid inhaling.   Use  only  with  adequate ventilation.  Avoid  contact  with  skin, eyes,  or  clothing.  In  case  of  contact, immediately  flush  skin  or  eyes  for at  least  15  minutes.   Get  medical attention  for  eyes. 9. Coat  four  studs  (12)  on  oil  cooler  (13)  with  oil (E253, E254,  or  E254.1).  Install  fan  assembly (4) on  the  studs without drive  shaft  (2). 10. Install  nuts  (14)  on  studs (12).  Torque  the  nuts  to 5 to 15 inch-pounds above  run-on  torque. 11. Slowly  rotate  fan  impeller  assembly  (15)  to ensure  clearance  with  baffle  (6).  No  rubbing  or binding  is  allowed. 12. Remove  nuts  (14).   Remove  fan  assembly  (4) from  oil  cooler  (12). FOLLOW-ON  MAINTENANCE: Install  combining  transmission  oil  cooler  fan  and  shaft (Task  6-186.1). Tasks  6-183  and  6-183.1  deleted. END  OF  TASK 6-602







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.