REMOVE, INSTALL AND INSPECT COMBINING TRANSMISSION CHIP DETECTOR
Some metal fuzz on tip of plug is
Check tip (4) on plug (1) for chips. Save chips for
contamination analysis (Task 6-108).
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Clean tip (4) with dry cleaning solvent (E162) and
clean cloths (E120). Wear gloves (E186). Dry tip.
Perform operational check of combining
transmission chip detector system (TM
Install plug (1) and packing (2) in chip detector
body (3). Push in and turn plug clockwise to lock.
Close aft pylon lower fairing (Task 2-2).
Close aft pylon access doors (Task 2-2).
END OF TASK