TM 55-1520-240-23-5
6-168
DRAIN COMBINING TRANSMISSION OIL
6-168
INITIAL SETUP
Applicable Configurations:
All
Tools:
Container, 14 Quart (2)
Hose, 1 Inch ID, 36 Inches Long
Workstand
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
Pylon Access Doors Open (Task 2-2)
Pylon Lower Fairing Open (Task 2-2)
NOTE
Combining transmission sump is
divided into three compartments. One
is for the combining transmission.
The other two are for each engine
transmission.
DRAIN COMBINING TRANSMISSION COMPART-
MENT
NOTE
Combining transmission compartment
holds about 23 quarts of oil.
1.
From inside cabin, connect hose (1) to drain
valve (2). Direct end of hose into container.
2.
Push in drain valve (2), twist it, and pull. Let oil
drain into container.
3.
Push in drain valve (2), twist it, and pull down to
close. Remove hose (1) from valve.
6-565