TM 55-1520-240-23-5
6-145
REMOVE AFT TRANSMISSION OIL COOLER
(Continued)
6-145
1.
Remove lockwire from plug (1) and drain plug
(2). Remove drain plug and packing (3). Drain
oil into container.
2.
Install plug (2) and packing (3).
3.
Remove eight nuts (4) and washers (5) from No.
2 ac generator (6).
Do not damage oil transfer tubes
when removing generator.
4.
Pull generator (6) straight back from transmission
(7) and two oil transfer tubes (8).
Wiring can be damaged if generator
is not supported.
5.
Tie generator (6) to structure at side of helicopter.
Use twine (E433).
6.
Remove screw (9). Disconnect clamp (10). Move
bundle (11) back for clearance.
6-515